CKFKP - AMERCOAT 395 IVORY RESIN; HIGH SOLIDS AMINE CURED EPOXY NO

  • MSDS: CKFKP
  • Manufacturer: AMERON PROTECTIVE COATINGS
  • Product Name: AMERCOAT 395 IVORY RESIN; HIGH SOLIDS AMINE CURED EPOXY NO
  • National Stock Number: 8010-00-402-0953
Product Identification

Product ID:AMERCOAT 395 IVORY RESIN; HIGH SOLIDS AMINE CURED EPOXY NO
MSDS Date:07/01/1996
FSC:8010
NIIN:00-402-0953
Status Code:A
MSDS Number: CKFKP

Responsible Party
AMERON PROTECTIVE COATINGS
201 NORTH BERRY STREET
BREA, CA 92622-1020
US

Emergency Phone: (800)424-9300

Info Phone: 714-529-1951

Cage: 0Y2E4

Contractor
AMERON PROTECTIVE COATINGS
1020 BREA, CA 92622-1020 US

Telephone: 714-529-1951

Cage: 0Y2E4

Ingredients

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 5MG/M3

ACGIH TLV: 5MG/M3


POTASSIUM ALUMINO-SILICATE

CAS: 12269-78-2

OSHA PEL 0.05 MG/M3

ACGIH TLV: 0.1 MG/M3


METHYL N-AMYL KETONE

CAS: 110-43-0

RTECS: MJ5075000

OSHA PEL 50 PPM (235MG/M3)

ACGIH TLV: 233 MG/M3;50 PPM


EPOXY RESIN

CAS: 25068-38-6

RTECS: CE6880000

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:SKIN: SEVERE IRRIANT. BURNS.
SENSITIZATION AN ALLERGIC REACTION SUCH AS RASH OR HIVES. CAN BE
ABSORBED THROUGH THE SKIN. CAN CAUSE DEFATTING AND DRYING OF SKIN.
INHALATION: SEVERE IRRITANT. LUNG INJURY. CENTRAL NERVOUS
SYSTEM DAMAGE. CHEMICAL PNEUMONIA. XYLENE OR TOLUENE MAY CAUSE
IRREGULAR HEART BEAT. EYES: SEVERE IRRITANT. SEVERE INJURY.
BURNS. DO NOT WEAR CONTACT LENSES WHEN USI NG THIS MATERIAL.
INGESTION: HARMFUL IF SWALLOWED. ASPIRATION INTO LUNGS CAN DAMAGE
LUNGS AND CAUSE CHEMICAL PNEUMONIA.
Effects of Overexposure:SPRAY MIST AND SPATTERED MATERIAL CAN BE
HARMFUL, IRRITATING TO EYES, SKIN AND IF INHALED TO NOSE AND
THROAT. EXCESSIVE OR PROLONGED INHALATION CCAN CAUSE HEADACH,
NAUSEA OR DIZZINESS. PROLONGED OR R EPEATED USE CAN AGGRAVATE OR
ACCENTUAT ANY OF THESE EFFECTS. REPEATED OVEREXPOSURE TO SOLVENTS
IS ASSOCIATED WITH PERMANENT BRAIN AND NERVOUS SYSTEM DAMAGE.
INTENTIONAL ABUSE, MISUSE OR OTHER MASSIV E EXPOSURE TO SOLVENTS
MAY CAUSE MULTIPLE ORGAN DAMAGE AND/OR DEATH.
Medical Cond Aggravated by Exposure:SKIN, EYES, RESPIRATORY, ALLERGIES.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING. TREAT
SYMPTOMATICALLY. SEE PHYSICIAN. SKIN: WASH THOROGHLY WITH SOAP
AND WATER. REMOVE CONTAMINATED CLOTHING. CONSULT PHYSICIAN IF
IRRITATIO N PERSISTS. EYES: FLUSH IMMEDIATELY WITH PLENTY OF
WATER FOR AT LEAST 15 MINUTES AND GET MEDICAL ATTENTION.
INGESTION: DRINK 1 OR 2 GLASSES OF WATER TO DILUTE. NEVER GIVE
ANYTHING BY MOUTH TO AN UNCONSIOUS PERSON. DO NTO INDUCE
VOMITING. CONTACT PHYSICIAN OR POISON CONTROL CENTER IMMEDIATELY.
TREAT SYMPTOMATICALLY. TARGET ORGANS: LUNGS, SKIN, EYES, STOMACH.

Fire Fighting

Flash Point Method:SCC
Flash Point:=42.2C, 108.F
108F
Extinguishing Media:CO2, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR FULL PROTECTIVE EQUIPMENT, SELF-CONTAINED
BREATHING APPARATUS. WATER MAY BE USED TO COOL CLOSED CONTAINERS
TO PREVENT PRESSURE BUILD-UP OR EXPLOSION WHEN EXPOSED TO EXTREME
HEAT.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT AND PRESSURE BUILDUP. MAY PRODUCE A
FLOATING FIRE HAZARD. KEEP AWAY FROM HEAT AND OPEN FLAME. WATER
OR FOAM MAY CAUSE FROTHING DUE TO GENE RATION OF CARBONE DIOXIDE.
WATER DECOMPOSES PRODUCT TO IRRITATING AND FLAMMABLE MATERIAL.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
BREATHING VAPORS. VENTILATE AREA. USE ABSORBENT, INERT, CLEANUP
MATERIALS. (DO NOT USE SAWDUST. ) REMOVE ABSORBENT MATERIAL WITH
NON-SPARKING TOOLS. PLACE IN SEPARATE CONTAINER. KEEP OUT OF
SEWERS AND WATERWAYS. IF ENTRY IS THREATENED OR OCCURS, NOTIFY
LOCAL AUTHORITIES.

Handling

Handling and Storage Precautions:KEEP CONTAINER CLOSED, UPRIGHT WHEN
NOT IN USE. STORE IN COOL, DRY, WELL-VENTILATIED AREA. AVOID
PROLONGED STORAGE TEMPERATURES ABOVE 100' F.

Exposure Controls

Respiratory Protection:WEAR NIOSH/MSHA CERTIFIED RESPIRATOR DESIGNED TO
REMOVE COMBINATION OF PARTICULATES(DUST/SPRAY MIST)&VAPOR.WHEN
BRUSHING,ROLLIN/SPREADING SELECT APPROPRIATE RESPIRATORY PROTECTION
FOR CONDITIONS.FOR S PECIFIC CONDITIONS,REFER TO CURRENT "NIOSH
POCKET GUIDE TO CHEMICAL HAZARDS".IN CONFINED/RESTRICTED
VENTILATION AREAS USE AIR-LINE RESPIRATORS/HOODS.*
Ventilation:SUFFICIENT VENTILATION, IN VOLUME AND PATTERN, SHOULD BE
PROVIDED TO KEEP AIR CONTAMINANT CONCENTRATIONS BELOW TLV LIMITS.
Eye Protection:SOLVENT RESISTANT GLASSES WITH SPLASH GUARDS OR FACE
SHIELD
Other Protective Equipment:DEPENDENT UPON APPLICATION METHOD WEAR
RESISTANT COVERALLS, GLOVES AND SHOE COVERINGS TO PREVENT SKIN
CONTACT.CONSULT 29 CFR1910.132,133,136, 138;ANSI Z87.1.USE
EXPLOSION AND SPARK PROOF EQUIPMENT.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING AND BEFORE
EATING, SMOKING OR USING TOILET. LAUNDER CONTAMINATED CLOTHING
BEFORE USE.
Supplemental Safety and Health
*REFER TO 29 CFR, OSHA PARTS 1910 AND 1915 FOR COATING OPERATIONS.
PART 1910.146 CONFINED SPACES: ANSI Z88.2, PRACTICES FOR
RESPIRATORY PROTECTION.REMOVE WELDING OR FLAME CUTTING
DECOMPOSITION PRODU CTS. REFER TO 29 CFR, OSHA PARTS 1910 AND 1915
FOR COATING OPERATIONS, PART 1910.146, CONFINED SPACES.

Chemical Properties

Boiling Pt:=148.9C, 300.F
B.P. Text:300F
Vapor Density:>AIR
Spec Gravity:14.7 LBS/GAL
Evaporation Rate & Reference:0.34
Appearance and Odor:LIQUID/SOLVENT ODOR
Percent Volatiles by Volume:12.6

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, ACIDS, ALKALIES, WATER.
Stability Condition to Avoid:HEAT, OPEN FLAME, ARC OR SPARKS. WATER OR
MOISTURE.
Hazardous Decomposition Products:CO, CO2. NOX, TOXIC GASSES OR FUMES.

Disposal

Waste Disposal Methods:PLACE IN SEPARATE, APPROPRIATE, CLOSED CONTAINER
IN ACCORDANCE WITH ALL APPLICABLE LOCAL, DSTATE, AND FEDERAL
REGULATIONS. THIS MATERIAL HAS NOT BEEN TESTED BYTOXICITY
CHARACTERISTIC LEACHIN PROCEDUR E (TCLP).

Toxicology

Toxicological Information:TITANIUM DIOXIDE: LD50 10G/KG (DERMAL
RABBIT); LC50 6820 PPM (INHALE.,RAT) METHYL N-AMYL KETONE: LD50
12G/KG; LC50 4000 PPM EPOXY RESIN: LD50 20 G/KG

Other Information

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ecology

Ecological:EPA NO.: D001

Transport

Transport Information:DOT: PAINT UN# 1263

Regulatory

State Regulatory Information:CALIFORNIA PROPOSITION 65: WARNING! THIS
PRODUCT CONTAINS A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO
CAUSE CANCER. WARNING! THIS PRODUCT CONTAINS A CHEMICAL KNOWN TO
THE STATE OF CALIFORNIA TO C AUSE BIRTH DEFECTS OR OTHER
REPRODUCTIVE HARM. 1) POTASSIUM ALUMINO-SILICATE